UNI-T UT804 Spezifikationen PDF herunterladen (Seite 30)

Model UT804: OPERATING MANUAL

Figure 3-4. DCµA Currents Measurement

D. Measuring Currents

If the fuse burns out during measurement, the Meter

may be damaged or the operator himself may be

hurt.

Warning

To avoid possible damage to the Meter or to the

equipment under test, check the Meter’s fuses

before measuring current. Use proper terminals,

function, and range for the measurement. Never

place the testing leads in parallel with any circuit

or component when the leads are plugged into the

current terminals.

To measure DCµA current, set up the Meter as Figure

3-4 and proceed as follows:

1. Insert the red test lead into the µAmA terminal and

black test lead into the COM terminal.

2. Set the rotary switch to µA

. DC measurement

is default, or press SELECT button to select DC

measurement mode.

3. Connect the test leads in serial with the object being

measured.

The measured value shows on the display.

It displays the RMS.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 68 69

Juan Alvear Guallart 19 Jun 2025 | 09:25:39

una gran web para descarga de manuales

Juan Alvear Guallart 19 Jun 2025 | 09:26:26

una gran web para descarga de manuales

UNI-T UT804 Spezifikationen Seite 30