UNI-T UT90A Spezifikationen PDF herunterladen (Seite 24)

To test for continuity, connect the Meter as below:

1. Insert the red test lead into the VΩ terminal and

the black test lead into the COM terminal.

2. Set the rotary switch to .

3. Connect the test leads across with the object being

measured.

The buzzer does not sound when the resistance

value is >100Ω. The circuit is disconnected.

The buzzer sounds continuously when the resistance

value is 10Ω. The circuit is in good condition.

Note

l The LCD displays 1 indicating the circuit being tested

is open.

l Open-circuit voltage is approx. 3V.

l When continuity testing has been completed,

disconnect the connection between the testing leads

and the circuit under test.

G.Battery Test (see figure 8)

Measurement Operation(11)

( figure 8)

black red

Model UT90A: OPERATING MANUAL

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Keine Kommentare

UNI-T UT90A Spezifikationen Seite 24