UNI-T UT501 Installationshandbuch PDF herunterladen (Seite 12)

RS-232 TO AMX 192

In this application, a personal computer may send ascii commands to operate individual dimmer channels.

CONNECTOR OPERATION

Microplex IN Not Used

Microplex OUT Not Used

DMX IN Not used

*DMX out Output AMX 192 (64 or 128)

MIDI / Analog Not used

Luma-net Not Used

RS-232 Input RS-232

JUMPER LOCATIONS

P4 & 5 P7 JP6 & 7 JP8 & 9 JP10 JP11 JP12 JP13

OPEN OPEN 1-2 N/A 2-3 2-3 1-2 2-3

P6 P8 JP1 DMX OUT CABLE

N/A N/A POS 5 OR 6 (BELOW) JP3

DIPSWITCH POSITIONS

C1 C2 C3 C4 ADDRESS 1 - 7 A8

DN UP UP DN N/A DN:64

Baudrate is either 9600 (JP1 - 6) or 2400 (JP1 - 5) with 8 data bits, 1 stop bit, no parity

Dimmer channels 1 to 100 can be controlled with these simple ASCII commands:

ASCII characters supported: F D G R - @ + : . 0-9

Fxx:xx.x (FADERATE, x=fade time in minutes : seconds . tenths),

Dccc-ccc@xxx (DIMMER LEVEL, c=channel number, -=to, +=and, x= level)

G (EXECUTE) R (RESET or BLACKOUT)

Carriage return after each command. Max fade time is 50 minutes.

Max fade time is 50 minutes.

AMX output is sent as either 64 or 128 channels, depending on the setting of switch A8.

*IMPORTANT - Move AMX output connector jumper from JP4 to JP3.

INTERFACE UNIT

Software Revision 1.05, Version A RS-232 TO AMX 192

NSI CORPORATION 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Keine Kommentare

UNI-T UT501 Installationshandbuch Seite 12